Mechanical Properties of Zirconia-Titanium Composites

Hideaki Tsukamoto

doi:doi:10.11648/j.ijmsa.20140305.28

| Peer-Reviewed

Mechanical Properties of Zirconia-Titanium Composites

Hideaki Tsukamoto

Published in International Journal of Materials Science and Applications (Volume 3, Issue 5)

Received: 19 September 2014 Accepted: 25 September 2014 Published: 30 September 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This study aims to investigate mechanical properties of ZrO2-Ti composites. The samples have been fabricated by spark plasma sintering (SPS). The experimental results demonstrate that a small amount of ZrO2 can enhance Ti matrix in hardness and tensile strength, while a large amount of ZrO2 degrade the tensile strength and ductility because of high extent of formation of titanium oxide. The mechanical properties of ZrO2-Ti composites can be related to thermo-mechanical behavior of ZrO2/Ti functionally graded materials (FGMs). In the FGMs, titanium oxide has also formed, which can largely influence thermo-mechanical behavior of the FGMs.

Published in	International Journal of Materials Science and Applications (Volume 3, Issue 5)
DOI	10.11648/j.ijmsa.20140305.28
Page(s)	260-267
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

ZrO2-Ti Composites, Titanium Oxide, Functionally Graded Materials (FGMs), Spark Plasma Sintering (SPS)

References

[1]	A.W. Nugroho, G. Leadbeater, I.J. Davies, “Processing of a porous titanium alloy from elemental powders using a solid state isothermal foaming technique,” J. Mater. Sci Mater Med, 2010, vol. 21, pp. 3103-3107.
[2]	T. Lidong, L. Wenchao. “Residual stress analysis of Ti-ZrO2 thermal barrier graded materials,” Mater Design, 2002, vol.23, pp. 627-632.
[3]	R.C. Gravie, R.H. Hannink, R.T. Pascoe, “Ceramic steels,” Nature, 1975, vol. 258, pp.704–730.
[4]	P.M. Kelly, L.R.F. Rose, “The martensitic transformationin ceramics- its role in transformation toughening,” Prog Mater Sci, 2002, vol. 47, pp. 463–557.
[5]	H. Tsukamoto, “Micromechanical modeling of transformation toughening in multi-phase composites enriched with zirconia particles,” Comp Mater Sci, 2010, vol. 48, pp. 724–729.
[6]	H. Tsukamoto, “Design against fracture of functionally graded thermal barrier coatings using transformation toughening,” Mater Sci Eng A, 2010, vol. 527, pp. 3217–3226.
[7]	H.Tsukamoto, “Analytical method of inelastic thermal stresses in a functionally graded material plate by a combination of micro- and macromechanical approaches,” Compos Part B-Eng, 2003, vol. 34, pp. 561-568.
[8]	K. Kokini, J. DeJonge, S. Rangaraj, B. Beardsley, “Thermal shock of functionally graded thermal barrier coatings with similar thermal resistance,” Surf Coat Tech, 2002, vol. 154, pp. 223–231.
[9]	Z. Han, B. Xu, H. Wang, S. Zhou, “A comparison of thermal shock behavior between currently plasma spray and supersonic plasma spray CeO2–Y2O3–ZrO2 graded thermal barrier coatings,” Surf Coat Tech, 2007, vol. 201, pp. 5253-5256.
[10]	L.D. Teng, F.M. Wang, W.C. Li, “Thermodynamics and microstructure of Ti-ZrO2 metal-ceramic functionally graded materials,” Mater Sci Eng A, 2000, vol. 293, pp. 130-136.
[11]	L.D. Teng, W.C. Li, F. M. Wang, “Effect of Ti content on the martensitic transformation in zirconia for Ti-ZrO2 composites,” J Alloy Compd, 2001, vol. 319, pp. 228-232.
[12]	K.L. Lin, C.C. Lin, “Reaction between titanium and zirconia powders during sintering at 1500oC,” J Am Ceram Soc, 2007, vol. 90, 2220-2225.
[13]	T.A. Schaedler, O. Fabrichnaya, C.G. Levi, “Phase equilibria in the TiO2-YO1.5-ZrO2,” J Euro Ceram Soc, 2008, vol. 28, pp. 2509-2520.
[14]	B.C. Weber, H.J. Garrett, F.A. Mauer, M.A. Schwartz, “Observations on the stabilization of zirconia,” J Am Ceram Soc, 1956, vol. 39, pp. 197-207.
[15]	A. Arias, “Thermal shock resistance of zirconia with 15 mol %Titanium,” J Am Ceram Soc, 1966, vol. 49, pp. 334-338.
[16]	M. Omori, “Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS),” Mater Sci Eng A, 2000, vol. 287, pp. 183-188.
[17]	H. Tsukamoto, T. Kunimine, M. Yamada, H. Sato, Y.Watanabe, “Microstructure and mechanical properties of Ti-ZrO2 composites fabricated by spark plasma sintering,” Key Eng Mat, 2012, vol. 520, pp. 269-275.

Cite This Article

Plain Text BibTeX RIS

APA Style

Hideaki Tsukamoto. (2014). Mechanical Properties of Zirconia-Titanium Composites. International Journal of Materials Science and Applications, 3(5), 260-267. https://doi.org/10.11648/j.ijmsa.20140305.28

Copy | Download

ACS Style

Hideaki Tsukamoto. Mechanical Properties of Zirconia-Titanium Composites. Int. J. Mater. Sci. Appl. 2014, 3(5), 260-267. doi: 10.11648/j.ijmsa.20140305.28

Copy | Download

AMA Style

Hideaki Tsukamoto. Mechanical Properties of Zirconia-Titanium Composites. Int J Mater Sci Appl. 2014;3(5):260-267. doi: 10.11648/j.ijmsa.20140305.28

Copy | Download

@article{10.11648/j.ijmsa.20140305.28,
  author = {Hideaki Tsukamoto},
  title = {Mechanical Properties of Zirconia-Titanium Composites},
  journal = {International Journal of Materials Science and Applications},
  volume = {3},
  number = {5},
  pages = {260-267},
  doi = {10.11648/j.ijmsa.20140305.28},
  url = {https://doi.org/10.11648/j.ijmsa.20140305.28},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20140305.28},
  abstract = {This study aims to investigate mechanical properties of ZrO2-Ti composites. The samples have been fabricated by spark plasma sintering (SPS). The experimental results demonstrate that a small amount of ZrO2 can enhance Ti matrix in hardness and tensile strength, while a large amount of ZrO2 degrade the tensile strength and ductility because of high extent of formation of titanium oxide. The mechanical properties of ZrO2-Ti composites can be related to thermo-mechanical behavior of ZrO2/Ti functionally graded materials (FGMs). In the FGMs, titanium oxide has also formed, which can largely influence thermo-mechanical behavior of the FGMs.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Mechanical Properties of Zirconia-Titanium Composites
AU  - Hideaki Tsukamoto
Y1  - 2014/09/30
PY  - 2014
N1  - https://doi.org/10.11648/j.ijmsa.20140305.28
DO  - 10.11648/j.ijmsa.20140305.28
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 260
EP  - 267
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20140305.28
AB  - This study aims to investigate mechanical properties of ZrO2-Ti composites. The samples have been fabricated by spark plasma sintering (SPS). The experimental results demonstrate that a small amount of ZrO2 can enhance Ti matrix in hardness and tensile strength, while a large amount of ZrO2 degrade the tensile strength and ductility because of high extent of formation of titanium oxide. The mechanical properties of ZrO2-Ti composites can be related to thermo-mechanical behavior of ZrO2/Ti functionally graded materials (FGMs). In the FGMs, titanium oxide has also formed, which can largely influence thermo-mechanical behavior of the FGMs.
VL  - 3
IS  - 5
ER  -

Copy | Download

Author Information

Hideaki Tsukamoto

Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Hideaki Tsukamoto. (2014). Mechanical Properties of Zirconia-Titanium Composites. International Journal of Materials Science and Applications, 3(5), 260-267. https://doi.org/10.11648/j.ijmsa.20140305.28

Copy | Download

ACS Style

Hideaki Tsukamoto. Mechanical Properties of Zirconia-Titanium Composites. Int. J. Mater. Sci. Appl. 2014, 3(5), 260-267. doi: 10.11648/j.ijmsa.20140305.28

Copy | Download

AMA Style

Hideaki Tsukamoto. Mechanical Properties of Zirconia-Titanium Composites. Int J Mater Sci Appl. 2014;3(5):260-267. doi: 10.11648/j.ijmsa.20140305.28

Copy | Download

@article{10.11648/j.ijmsa.20140305.28,
  author = {Hideaki Tsukamoto},
  title = {Mechanical Properties of Zirconia-Titanium Composites},
  journal = {International Journal of Materials Science and Applications},
  volume = {3},
  number = {5},
  pages = {260-267},
  doi = {10.11648/j.ijmsa.20140305.28},
  url = {https://doi.org/10.11648/j.ijmsa.20140305.28},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20140305.28},
  abstract = {This study aims to investigate mechanical properties of ZrO2-Ti composites. The samples have been fabricated by spark plasma sintering (SPS). The experimental results demonstrate that a small amount of ZrO2 can enhance Ti matrix in hardness and tensile strength, while a large amount of ZrO2 degrade the tensile strength and ductility because of high extent of formation of titanium oxide. The mechanical properties of ZrO2-Ti composites can be related to thermo-mechanical behavior of ZrO2/Ti functionally graded materials (FGMs). In the FGMs, titanium oxide has also formed, which can largely influence thermo-mechanical behavior of the FGMs.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Mechanical Properties of Zirconia-Titanium Composites
AU  - Hideaki Tsukamoto
Y1  - 2014/09/30
PY  - 2014
N1  - https://doi.org/10.11648/j.ijmsa.20140305.28
DO  - 10.11648/j.ijmsa.20140305.28
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 260
EP  - 267
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20140305.28
AB  - This study aims to investigate mechanical properties of ZrO2-Ti composites. The samples have been fabricated by spark plasma sintering (SPS). The experimental results demonstrate that a small amount of ZrO2 can enhance Ti matrix in hardness and tensile strength, while a large amount of ZrO2 degrade the tensile strength and ductility because of high extent of formation of titanium oxide. The mechanical properties of ZrO2-Ti composites can be related to thermo-mechanical behavior of ZrO2/Ti functionally graded materials (FGMs). In the FGMs, titanium oxide has also formed, which can largely influence thermo-mechanical behavior of the FGMs.
VL  - 3
IS  - 5
ER  -

Copy | Download